Practical Guide to Free-Energy Devices

Patrick J. Kelly

Con la tecnología de Traductor de Google


The purpose of this website is to provide you with an introduction to a series of devices which have been shown to have very interesting properties and some are (incorrectly) described as ‘perpetual motion’ machines.What’s that you say – perpetual motion is impossible?   My, you’re a difficult one to please.   The electrons in the molecules of rock formations have been spinning steadily for millions of years without stopping – at what point will you agree that they are in perpetual motion?So, why don’t electrons run out of energy and just slow down to a standstill?   Quantum Mechanics has shown that the universe is a seething cauldron of energy with particles popping into existence and then dropping out again.   Knowing that E = mC2, we can see that a tremendous amount of energy is needed to create any form of matter.   Scientists remark that if we could tap even a small part of that energy, then we would have free energy for our lifetime.

The Law of Conservation of Energy is undoubtedly correct when it shows that more energy cannot be taken out of any system than is put into that system.   However, that does not mean that we cannot get more energy out of a system than weput into it.   A crude example is a solar panel in sunlight.   We get electrical power out of the panel but we do not put the sunlight into the panel – the sunlight arrives on its own.   This example is simple as we can see the sunlight reaching the solar panel.

If, instead of the solar panel, we had a device which absorbs some of the energy which Quantum Mechanics observes and gives out, say, electrical power, would that be so different?   Most people say «yes! – it is impossible!» but this reaction is based on the fact that we cannot see this sea of energy.   Should we say that a TV set cannot possibly work because we cannot see a television transmission signal?

Many people have produced devices and ideas for tapping this energy.   The energy is often called «Zero-Point Energy» because it is the energy which remains when a system has its temperature lowered to absolute zero.   This presentation is introductory information on what has already been achieved in this field: devices which output more power than they require to run.   This looks as if they contradict the Law of Conservation of Energy, but they don’t, and you can see this when you take the zero-point energy field into account.

The material on this web site describes many different devices, with diagrams, photographs, explanations, pointers to web sites, etc.   As some of the devices need an understanding of electronic circuitry, a simple, step-by-step instruction course in electronics is also provided in Chapter 12.   This can take someone with no previous knowledge of electronics, to the level where they can read, understand, design and build the type of circuits used with these devices.

This is a very interesting field and the topic is quite absorbing once you get past the «it has to be impossible» attitude.   We were once told that it would be impossible to cycle at more than 15 mph as the wind pressure would prevent the cyclist from breathing.   Do you want to stay with that type of ‘scientific’ expert?   Have some fun – discover the facts.

There are many, many interesting devices and ideas already on the web.   This site does not mention them all by any means.   What it does, is take some of what are in my opinion, the most promising and interesting items, group them by category, and attempt to describe them clearly and without too many technical terms.   If you are not familiar with electronics, then some items may be difficult to understand.   In that case, I suggest that you start with Chapter 12 and go through it in order, moving at whatever speed suits you, before examining the other sections.   I hope you enjoy what you read.

Note: When you have finished reading any of the sections shown below, use the ‘Back’ button of your browser to return to this page.   You will need Version 7.0 or later of the Adobe ‘Acrobat’ reader to display these sections. It can be downloaded free from: here


The main information on this web site has been gathered together into a standard book format.   You can download the main set of information, including the patents, as an eBook, using this link eBook Release 22.0.   The document contains some 2,500 pages and has a file size of about 40 Mb which means that it will take some time to download.   It is also possible to use a background download from fileFactory.   Alternatively, you can pick individual chapters as you wish.   May I suggest that you store anything you download on your local drive as web sites do not remain in place for ever.   The last few updates to this document are listed here.

Note: Some versions of Groogle’s Chrome browser appear to be unable to read the pdf files on this website properly. The result is blank pages after the first page. If that happens to you, then please use Microsoft’s Internet Explorer or Mozilla’s Firefox browser to download a proper copy, or alternatively, find the missing Chrome plug-in.

Contents   eBook Index: An explanation of the background followed by a general index, an index of devices and an index of the people and devices mentioned.

Introduction   Newcomer’s Introduction: A quick guide to what Free-Energy is all about, explaining the basics. HTML   

Chapter 1   Magnet Power: The Wang magnet motor, the Ecklin-Brown motor-generator, Howard Johnson’s magnet motor, the ‘Carousel’ magnet motor, Robert Tracy’s magnet motor, Ben Teal’s electromagnetic motor, the Jines magnet motor, Stephen Kundel’s magnet motor, Charles Flynn’s magnet motor, the Steorn magnetic device, George Soukup’s magnet motor, Dietmar Hohl’s magnet motor, the Muammer Yildiz magnet motor patent, Steele Braden’s magnetic track, Emil Hartman’s magnetic track, Howard Johnson’s magnetic track, the shielded twin-rotor idea, Don Kelly’s magnet motor patent and Mike Brady’s ‘Perendev’ Magnet Motor. size 1.0 Mb, 14 Mar 2011 HTML 

Chapter 2   Moving Pulsed Systems: The Adams motor/generator, the Phemax self-powered motor/generator, Raymond Kromrey’s No-drag Generator, Teruo Kawai’s motor, self-powered 800 watt generator, the Mourier COP=10,000 motor, the RotoVerter, Raoul Hatem’s free-energy rotor system, Art Porter’s magnetic motor system and raising the efficiency of DC motors size 1.3 Mb, 11 Aug 2012 HTML

Chapter 3   Motionless Pulsed Systems: Graham Gunderson’s Solid-state Electric Generator, Charles Flynn’s magnetic power enhancement system, Lawrence Tseung’s magnetic frame, Thane Hines’ dual toroid magnetic frame, cascaded frames, the Annis/Eberly Motionless Generator, the Richard Willis COP>1 generator, Stephan Leben’s self-powered electrical generator, Floyd Sweet’s VTA, the Pavel Imris optical amplifier, Michael Ognyanov’s self-powered power pack, the Meyer-Mace Isotopic Generator, the Colman/Seddon-Gilliespie generator, Hans Coler’s active device, Robert Norrby’s generator, Don Smith’s «Resonance Energy Methods», Nikanor Giannopoulos’ dual Tesla Coil arrangement, the Dynatron system explained, Tariel Kapanadze’s self-powered electrical generator, Kapanadze’s coil and motor explained by William McFreey, Cold electricity coil technology and Stan Meyer’s Particle Generator patent.. size 3 Mb, 11 Augl 2012 HTML

Chapter 4   Gravitational Pulsed Systems: Lawrence Tseung’s pulsed wheel, Lawrence Tseung’s Impact gravity wheel, Chas Campbell’s pulsed flywheel, John Bedini’s pulsed flywheel, James Hardy’s water-jet generator, the Magnetic Pendulum, Jerzy Zbikowski’s Chain Drive, Gravitational Effects, Mikhail Dmitriev’s gravity wheel, the Dale Simpson gravity wheel, the Veljko Milkovic pendulum/lever system, the Dale Simpson hinged-plate system, Amr Al-Hossary’s Gravity Wheel, the Murilo Luciano gravity chain and Ivan Monk’s Rotary Power Unit. size 1 Mb, 20 Dec 2011 HTML

Chapter 5   Energy-Tapping Pulsed Systems: Frank Prentice’s electrical power accumulator, Dave Lawton’s cold electricity water-splitter cell, John Bedini’s pulsed battery charger, the Tesla Switch, Dave Lawton’s cold electricity lightbulb, Bob Boyce’s COP=12 energy tapping toroid, Don Smith’s devices, Steven Mark’s TPU, Vladimir Utkin’s explanations of Tesla, Don Smith, Tariel Kapanadze and current amplification, Lawrence Tseung’s toroids, the Ed Gray power tube, Radiant Energy waves, Nikola Tesla’s experiments, Don Smith information, the Alberto Molina-Martinez generator, Alfred Hubbard’s device, Joseph Cater’s device, a Hubbard design, Floyd Sweet’s VTA, Rosemary Ainslie’s heater design, Joseph H. Cater’s self-powered generator and Dr Oleg Gritskevitch’s 1.5 MW generator. size 3.2 Mb, 20 Jul 2012 HTML

Chapter 6   Battery-Charging Pulsed Systems:
 John Bedini’s pulsed systems, Roger Andrews’ switching system, Ronald Knight’s battery information, Ron Pugh’s battery charger build, a self-charging battery pulser, the fan pulse charger, the automotive pulse charger, the self-charging motor, the Alexkor battery charger, Howerd Halay’s battery conditioning technique, the one-battery pulse charger, the Tesla Switch and the self-charging motor. size 841 Kb, 15 Mar 2012 HTML

Chapter 7   Aerial Systems: Nikola Tesla’s system, Thomas Henry Moray’s system, Moray King’s circuit suggestions, Hermann Plauson’s systems, Roy Meyer’s device, Raymond Phillips’ RF to DC aerial system, the ‘Alexkor’ aerial system, Dragan Kljajic’s printed circuit, the TREC aerial and Harold Deyo’s patent application. size 342 Kb, 1 May 2012 HTML

Chapter 8   Fuel-less Engines: The energy in air, Bob Teal’s compressed air engine, Scott Robertson’s thoughts on putting low-pressure air into a tank of high-pressure air, the Leroy Rogers compressed-air vehicle engine adaption, the Vortex Tube, the Eber Van Valkinberg compressed fluids engine, the Clem engine, Vortex analysis by Prof. Evert, the Josef Papp engine, the Robert Britt engine, the Michael Eskeli turbines, the water-jet generator and the Cahill / Scott generator. size 504 Kb, 3 May 2012 HTML

Chapter 9   Passive Systems:
 Hans Coler’s device, Thomas Trawoeger’s pyramid, Karel Drbal’s pyramid, James Brock’s pyramids, Verne Cameron’s pyramid transmission technique, the Pancake coil, Peter Grandic’s patent, Les Brown’s pyramid information, Joseph Cater’s explanation of how all pyramids work, Pier Ighina’s passive energy devices, the Joe Cell, Bill Williams’ design and recent analytical advances, co-ax cable electrets and Joseph H. Cater’s free-energy box. size 1.0 Mb 22 Jul 2012 HTML

Chapter 10   Vehicle Systems: The HydroStar and HydroGen designs, running an engine on water alone, Hydroxy Boosters, electrolyser design, the ‘Hogg’ electrolyser, Pulse Width Modulation current control, Dave Lawton’s replication of Stan Meyer’s Water Fuel Cell water-splitter, Dave Lawton’s circuits and construction details, pipe-tuning details, Dr Cramton’s low-power water-splitting, modifying generators to run on HHO alone, David Quirey’s system for running unmodified generators on HHO, Stan Meyer’s water injection system, Peter Lowrie’s hydroxy system, mpg improvement through cam timing, the Firestorm spark plug, Ted Ewert’s Vortex Turbine, Water Vapour Injection systems, the Ram Implosion Wing, Fuelsavers, high mpg carburettors, Vortex fuel reformers and the weird nature of water. size 2.6 Mb, 7 Jun 2012 HTML

Chapter 11  Other Devices: Nikola Tesla’s power from air system, Dr. Harold Apsden’s Electrical Power Generating Apparatus patent, Our Energy Future, Paulo and Alexandra Correa’s conversion of Longitudinal Electromagnetic Waves to ordinary electricity, Prof. Constantin Meyl’s scalar wave information, Nikola Tesla’s MHD device, the effects of the Zero-Point Energy field, John R. R, Searle’s self-powered garvitational device, construction details for Dave Lawton’s gravity wave detector, the Butch Lafonte motor/generator, the Joseph Newman motor, the differences between Maxwell and Heaviside, Daniel Cook’s electrical generator, Michael Eskeli’s work-free heater design, Karl Schapeller’s Device, Condensation-induced water hammer, William Hyde’s COP=10 electrostatic power generator, the suppression of knowledge, Bob Beck’s medical information and Joseph Cater’s scientific information. size 2 Mb, 26 Sep 2011 HTML

Chapter 12   Electronics Tutorial: Simple descriptions of Voltage, resistors, capacitors, current flow, multimeters, transistor circuits, sensor systems, relays, diodes, transistor testing circuits, Power Supply Units, AC, DC, rectification, the SCR, the triac, the opto-isolator, LEDs, chokes, transformers, the Schmitt Trigger, solenoids, RF detection, coil impedance, the diode bridge, multivibrators, inverters, truth tables, the 7414 chip, NAND gates, latches, bistables, gating, the 4093 chip, prototype construction, the 4011, the Darlington pair, using a gate as an amplifier, the 555 chip, the 741 chip, op-amps and comparators, a simple, versatile, Schmitt inverter signal generator, the CD4022BC chip, the CD4017B with divide-by-25 example, programming the PIC chip, capacitors, AC current in coils, resonance, constructing prototypes, test equipment and how to build it, and ‘the weird stuff’. size 970 Kb, 7 Oct 2011HTML

Chapter 13   Doubtful Devices: Paul Baumann’s Thestatika, Michael Faraday’s Homopolar Generator (or the N-Machine), the Borderland Science AC version of the N-machine, the Romag and Mini-Romag, Cold Fusion, Moller’s Atomic Hydrogen Generator, Muammer Yildiz’s ‘Ocean Star’ electrical generator, Jesse McQueen’s ‘Internal Energy-generating Power Source’, the ‘D18’ Nitro Cell, the HydroStar and HydroGen systems, Hydrogen from Aluminium, Francois Cornish’s system, Ultrasonic Water-splitting, Tom Bearden’s Motionless Electromagnetic Generator, Dave Lawton’s assymetric MEG and Valeri Ivanov’s Motionless Generator. size 689 Kb, 12 Oct 2010 HTML

Chapter 14   Renewable-Energy Devices: Efficient solid-fuel burners, Stan Meyer’s hydroxy gas burner system, the Kim heaters, the Eugene Frenette heater, the Eugene Perkins heater, the multi-disc heater, the Peter Davey heater, the simple home-build windmill design from Dan Bartmann and Dan Fink, William McDavid’s wind or water generator, Frank Herbert’s high-efficiency windmill, the ‘Power Plant for Caravans’ from Claude Mead and William Holmes, the easy-build Solar Funnel cooker, water and milk pasteurisation, the Solar Funnel as a Cooler, the Solar Puddle, the ‘Easy-Lid Cooker’, drinking water systems, solar sills, Elmer Grimes’ high-volume drinking water from air, the Chalice Courneya water from air system, Toribio Bellocq’s well-pumping system, Richard Dickinson’s well-pumping system, Arthur Bentley’s well-pumping system, the self-powered Ram Pump, wave power systems, solar icemaking, Einstein’s refrigeration through heating and solar panels. size 1.9 Mb, 20 Dec 2011 HTML

Chapter 15   The current situation: why free-energy devices are not yet on sale in your local shop. How to get out of debt: the situation in the UK, the deception of «Joinder», the deception of «Notice», the deception of «Includes», the deception of «Summons», the deception of the «Name», the deception of the «Birth Certificate», the deception of «Registration», the «Government» is actually a company, meet your «strawman», what the police can and can’t do, the situation in America, economic hit-men and their actions, the techniques used against you, the resulting consequences, research material and the practical situation and what you can do about it. size 287 Kb, 26 Oct 2011 HTML

Chapter 16   
A selection of Questions asked by readers and the Answers provided. Topics: What Should I Build? – opinions expressed on more than 90 devices, Electrolysis, Magnet Motors, Don Smith’s Devices and General Queries and magnetic heater details. size 515 Kb, 27 Jan 2012 HTML

The last few updates to the eBook are listed here.

Appendix Part 1 The Appendix is part of the eBook and is normally downloaded with it. However, there have been one or two requests for it to be available as a separate download, so here is Part 1 which is 4 Mb in size and which contains:
a table of wire sizes, their diameter, current-carrying capacity, frequency limits, etc.
Frank Fecera’s permanent magnet motor patent
Howard Johnson’s permanent magnet motor patent
Harold Ewing’s Carousel permanent magnet-generator patent
The Pavel Imris minimal power lighting system patent
The Colman/Seddon-Gillespie 70-year battery patent
The Jon Sok An Lenz-less electrical generator patent
The Molina Martinez self-powered electrical generator patent
Michael Ognyanov’s solid-state electrical generator patent
Edwin Gray’s electric motor patent
Edwin Gray’s electric power supply patent
The Adams-Aspden electrical motor-generator patent
William Barbat’s self-powered electrical generator patent
John Reardon’s AC generator patent
Geoffrey Spence’s self-powered electrical generator patent
Robert Alexander’s COP = 2.93 electrical generator patent
Shigeaki Hayasaka’s electrical generator patent
Larry Jamison’s electrical generator patent application
Teruo Kawai’s COP>1 electric motor patent
Joseph Newman’s Energy Generator patent
Philip Brody’s very high output ceramic solar devices patent
Charles Flynn’s controlled magnetic devices patent
The Motionless Electromagnetic Generator patent
Dan Davidson’s acoustic-magnetic electrical generator patent
John Bedini’s battery-charging patent
John Bedini’s motor-generator patent and
John Bedini’s pulse-charging system patent.
Background download

Appendix Part 2 Size 4 Mb, containing:
Richard Weir and Carl Nelson’s battery replacement patent
Hermann Plauson’s aerial power systems patent
Roy Meyers’ Electricity-producing device patent
Paulo and Alexandra Correa’s free-electricity patent
Paulo and Alexandra Correa’s energy conversion patent
The Mead-Nachamkin ZPE to electricity conversion patent
Stanley Meyer’s Water Fuel patent 4,936,961
Stanley Meyer’s hydrogen injection system for vehicles patent 4,389,981
Stanley Meyer’s hydrogen gas burner patent 4,421,474
Stanley Meyer’s hydrogen generation and enhancement patent 5,149,407
Stanley Meyer’s water fuel generator patent CA 2,067,735
Stanley Meyer’s WFC control circuitry patent WO 92/07861
Stephen Meyer’s water-splitting patent application 2005/0246059
Henry Puharich’s water-splitting patent 4,392,230
Shigeta Hasebe’s spiral electrolyser patent
Stephen Chambers’ hydroxy generator patent (Xogen Power Inc.)
Charles Garrett’s water carburettor patent
Archie Blue’s electrolyser patent
Ruggero Santilli’s plasma arc electrolysis patent
Chak Chang’s low-voltage, low-temperature plasma patent application.
Background download

Appendix Part 3 Size 7 Mb, containing:
Juan Aguero’s water-engine patent application
Stephen Horvath’s water-powered car patent
Christopher Eccles’ water-splitting cell patent
Spiro Spiros’ COP>1 electrolyser patent
Henry Paine’s hydroxy gas conversion patent
Boris Volfson’s gravity space-drive patent
Charles Pogue’s first high-mpg carburettor patent
Charles Pogue’s second high-mpg carburettor patent
Charles Pogue’s third high-mpg carburettor patent
Ivor Newberry’s high-mpg carburettor patent
Robert Shelton’s high-mpg carburettor patent
Harold Schwartz’s high-mpg carburettor patent
Oliver Tucker’s high-mpg carburettor patent
Thomas Ogle’s high-mpg carburettor patent
Stephen Kundel’s permanent magnet motor
Charles Flynn’s permanent magnet motor
Claude Mead and William Holmes’ wind power storage system
Richard Willis’ COP>>1 electrical generator
Mark McKay’s investigation into Edwin Gray’s technology
Mike Brady’s «Perendev» Magnet Motor patent
Donald Kelly’s Magnet Motor patent
Bob Neal’s Air Compressor patent
The Leroy Rogers Compressed air engine conversions
Eber Van Valkinburg’s Compressed Air engine
Josef Papp’s Inert Gas fuel-less engine
Robert Britt’s Inert Gas fuel-less engine
Floyd Sweet’s «VTA» Electricity Generator theory
Meguer Kalfaian’s Electricity Generator
The Annis and Eberly Solid-State Magnetic Flux-Switching System
William McDavid Junior’s High-Efficiency Wind-Power Generator
Web links to Scientific Papers and videos.
Background download

Index of DevicesIndex of People


Sir Oliver Lodge
 «Modern Views of Electricity» : an exceptional book on electricity, magnetism, electrostatics, radiation, etc.» size 27 Mb. Background download

Sir Oliver Lodge «The Ether of Space» a book which gives an in-depth coverage of the subject.» size 9 Mb. Background download

Sir Oliver Lodge «The Nature and Properties of Negative Electricity» a 230-page book by a talented man who was among other things a Fellow of the Royal Society and Professor of Physics of University College, Liverpool.» size 22 Mb. Background download

Don Smith: A document from Donald Lee Smith showing several of his many multi-kilowatt free-energy devices (updated 20/3/11)size 2 Mb.Background download     HTML

Dr Aspden: Physics Without Einstein by Dr. Harold Aspden size 13 Mb. Background download 

Dr Aspden: Modern Aether Science by Dr. Harold Aspden size 7 Mb. Background download 

Dr Aspden: Unified Physics by Dr. Harold Aspden size 10 Mb. Background download 

Dr Valone: An introduction to the science of Tesla by Thomas Valone PhD size 14.5 Mb. Background download

Maurice Cotterell: An amazing description and analysis of electron spin and how it affects gravity, an explanation of the true structure of atoms, why neutrons are essential, what gravity is, how and why matters attracts, how permanent magnetism works, why iron is a magnetic material, the nature of dark matter, why galaxies are spiral in shape, why the centre of the Earth is hot, and why the Earth has a magnetic field. size 2.9 Mb. 

Nikola Tesla: The Inventions, Researches and Writings of Nikola Tesla by Thomas Commerford Martin (500 pages) size 36 Mb. Background download

The Tesla Coil: Haller and Cunningham’s book on building and using a Tesla Coil (actually building a coil of this type is only for people who are already experienced in using high-voltage circuits) size 2.5 Mb. Background download   

Karl Schappeller: Cyril Davson’s Book on Karl Schappeller «The Physics of the Primary State of Matter» size 48 Mb.         Background download or the Summary of Schappeller’s free-energy device by Henry Stevens size 183 Kb. 

Note: I would like to direct you to where you could buy Joseph Newman’s important book, but as far as I am aware, it is not available at this time.
Newman Part 1: «The Energy Machine of Joseph Newman» size 18 Mb.  : Background download

Newman Part 2: «The Energy Machine of Joseph Newman» size 20 Mb.  : Background download

Newman Part 3: «The Energy Machine of Joseph Newman» size 15 Mb.  : Background download

Newman Part 4: «The Energy Machine of Joseph Newman» size 14 Mb.  : Background download

Newman Part 5: «The Energy Machine of Joseph Newman» size 32 Mb.  : Background download

                 Download of the complete book (95 Mb)     Alternative download     Joseph Newman’s web site

Donald A. Kelly: The ‘Manual of Free Energy Devices and Systems’ eBook by Donald A. Kelly, issued in 1991.   size 13 Mb. Background download   

T. H. Moray: «The Sea of Energy in which the Earth Floats» fourth edition by Thomas Henry Moray size 402 Kb. 

John Moray: «The Sea of Energy in which the Earth Floats» fifth edition by John Moray, the son of Thomas Henry Moray size 40 Mb. Background download 

Dan Davidson: Shape Power – how shape is important in the conversion of ambient energy into more recognisable forms. size 5 Mb. 

ZPower: «Zero Point Energy» from Reed N. Huish’s website which is dedicated to helping the world move to clean free-energy sources of practical power. size 1 Mb. 

Ultrasonics: Ultrasonics by Blitz: ultrasonics causes electrically charged cavitation bubbles in water and the charge causes electrolysis – while not free-energy, this may be of interest. size 30 Mb. 

Stan Meyer: A 140-page test report on Stanley Meyer’s «Water Fuel Cell» low input power water-splitter system. size 10 Mb. Background download 

Stan Meyer’s Technical Brief: Stanley Meyer’s 220-page «Water Fuel Cell Technical Brief» size 4 Mb.

Shinichi Seike: Ultra Relativity by Shinichi Seike size 8 Mb. Background download 

Magnetos: A very simple explanation of how magnetos work and how they can be built. size 9 Mb.

Tesla Patents: The complete set of all the published patents of Nikola Tesla.

Tesla article: A 1919 article by Nikola Tesla on the transmission of power.

Secrets of the Aether An on-line eBook by David W. Thomson and Jim D. Bourassa.

Rosemary Ainslie A COP=17 heater design from Rosemary Ainslie, 250 page documentation by Panacea-bocaf and a shorter simplified description also from Panacea-bocaf

Special Electromagnet A method of making an electromagnet which can attach to non-ferrous metals.

Here is a set of very professionally produced free-energy magazines from some years ago. They are produced by Alexander V. Frolov whose web site is here. Most of these issues are about 4 Mb in size.
Issue 1   Issue 2   Issue 3   Issue 4   Issue 5   Issue 6   Issue 7   Issue 8   Issue 9   Issue 10   Issue 11
Issue 12   Issue 13   Issue 14   Issue 15   Issue 16   Issue 17   Issue 18   Issue 19   Issue 20   Issue 21   Issue 22
 Contents listing for these magazines   Background download for all issues in one folder (123 Mb)
Current Research Status: details of the current status of many of the projects of these Russian scientists (1.5 Mb).

Medical Remedy: Colloidal Silver – a simple homemade remedy for most illnesses: cancer, AIDS, Lyme’s disease, arthritic pain, skin burns, etc. size 60 Kb.   HTML

Cure All Cancers: Cancer cures by Hulda Clark. size 3.5 Mb. 
Cure All Diseases: Cures for general illnesses by Hulda Clark. 
size 5.1 Mb. 
Lab Manual: Additional information from Hulda Clark 
size 2.5 Mb. 

Bob Beck: Spectacular medical treatments described by Bob Beck. size 900 Kb. 

Interesting web video links:

Free-Energy Video: Very important presentation introducing the whole subject.

Free-energy Overview: A web site with various videos and a very good description of where free-energy research is at the present time.

COP>3 demo Conventional science swears that more power can never come out of a system than the user puts into that system. This demonstration shows an output power more than three times the input power, proving that conventional science is wrong. There are many linked demonstrations from the same man, all of which are worth watching.

Generator: A self-powered motor generator from Prof. Kanarev.

Important lecture: A presentation by Dr Peter Lindemann on Tesla’s single-wire power transmission systems and related patents.

Don Smith: A lecture in 16 parts by Donald Lee Smith, explaining how to gather excess energy.

Don Smith: A lecture by the very talented and experienced Donald Lee Smith on his Tesla-style power-tapping devices.

Don Smith Replication: A very simple implementation of the front end of Don Smith’s devices.

Martin Grusenick: Video of a recent experiment which demonstrates the presence of the zero-point energy field.

GEET Video of an engine running on Sprite, coffee and 1% petrol.

Tom Bearden: Interview with Tom Bearden, Part 1.
Tom Bearden: Interview Part 2.
Tom Bearden: Interview Part 3.
Tom Bearden: Interview Part 4.
Tom Bearden: Interview Part 5.
Tom Bearden: Interview Part 6.
Tom Bearden: Interview Part 7.
Tom Bearden: Interview Part 8.

Self-charging motor: A small self-charging motor system Prototype 2.
Self-charging motor: A small self-charging motor system Prototype 3.
Self-charging motor: A small self-charging motor system Prototype 4.

Electricity Magnifier: Chas Campbell’s pulsed flywheel system which produces excess power.

Electrical Magnification: Richard Willis running mains equipment from dead car batteries.

Self-charging Motor: Commercial motor has added magnets and runs from capacitors while charging them and other capacitors

Wood screw motor: An ultra simple magnet motor demonstration.

Water-jet Generator: An ultra simple, home-built, water-pump self-powered electrical generator.

Water in Engines: Important demonstrations and explanations of using water when powering engines.

Puharich lecture: A lecture from a man who ran his motorhome for thousands of miles on water alone.

Newman Car: Web link to a video showing Joseph Newman’s latest car in operation.

Free-Energy Device: Part 1 of a video showing a solid-state over-unity device in operation.
Free-Energy Device: Part 2 of a video showing a solid-state over-unity device in operation.

Free-Energy Device: A video showing Steven Mark’s solid-state free-energy device in operation.

Free-Energy Device: A second video showing Steven Mark’s solid-state free-energy device in operation.

Free-Energy Device: A third video showing Steven Mark’s solid-state free-energy device in operation.

Commercial FE Device: Video of a highly tested series of 140% efficient electrical generators.

Demonstration: Web link to a video of a demonstration and explanation of Tesla’s Longitudinal Waves.

Demonstration 2: Web link to a video of a second demonstration of Tesla’s Longitudinal Waves.

Papp Motor: Web link to a video of a Papp motor in action and shots of the actual explosions.

Prof. John R. R. Searl: Web link to a lecture on his 240V 15KW generator / gravity-drive unit.

Stan Meyer Video: Video of Stan demonstrating his water-splitting cell which needs very little power

Stan’s Fuel Cell: Video of Stan Meyer’s Water Fuel Cell being demonstrated size 7 Mb. 

Dave’s Fuel Cell: Video of Dave Lawton’s replication of Stan Meyer’s Water Fuel Cell in action size 1 Mb. 

Stan Meyer Video: Video of TV interview with Stan and a short clip of his dune buggy in action size 4 Mb. 

Joe Cell Video 7: A very successful Joe Cell implementation in USA (details in Chapter 9) size 17 Mb. 

Stage-1 Joe Cell: Video by kind permission of Alex Schiffer, showing a Stage-1 cell in operation size 2 Mb. 

Stage-2 Joe Cell: Video showing a Stage-2 cell in operation size 2 Mb. 

Stage-3 Joe Cell: Video showing a Stage-3 cell (capable of powering an engine) in operation size 3.5 Mb. 

Pyramid: An electric fan driven by pyramid energy (German-language).

Battery: A self-charging battery system.

6 kW generator: A solid-state, self-contained device which produces electricity without the use of any fuel.

Magnet Motor: A magnet motor producing about 250 watts of power.

COP=4 Motor: A motor-generator producing four times as much output power compared to the input power needed to make it run.

Free-Energy Suppression Panacea’s very detailed record of the opposition to the introduction of Free-Energy devices.

Part 1 A rather technical lecture by eric Dollard and Chris Carson
Part 2    Part 3    Part 4     Part 5    Part 6

Drawing Part 1: As I have been asked several times how the diagrams in my eBook are created, here are three casual, unplanned videos showing how I use a free drawing package.
Drawing Part 2 These videos were created without the use of video equipment.
Drawing Part 3 Using Fox Magic’s «Screen Virtuoso» program.

Electrolyser construction plans and Suppliers:

Booster 1   The very popular Smack’s Booster.
Booster 2   The ultra simple Hotsabi Booster.
Booster 3   Bill Williams’ dual booster design.
Booster 4   Zach West’s very interesting booster design.
Fuel Injection Control   Methods of dealing with the ECU fuel injection rate.
Electrolyser   The spectacular 100 lpm high-quality, 1,200% efficient, HHO gas electrolyser design from Bob Boyce. Please note that Bob Boyce is currently under attack in an attempt to discredit him. False forum posts are being made in his name by malicious individuals who are attempting to deny his achievements and the quality of his work. Personal physical attacks have been made on him and these are endangering his life at this time.

Patents:Kapanadze replications. J L Naudin’s collection of the successes of various replicators – definitely worth a visit.
Star-drive Generator: Details of unlimited free-energy on tap for ever – most impressive.
RexResearch: The leading Free-Energy research site – definitely a ‘must-visit’ site.
Prof. Evert: A most important web site from one of the top zero-point energy researchers.
John Bedini: A presentation of John’s Zero-Point Energy system – highly recommended.
Alexander Frolov: Important experimental data and theory on accessing free-energy.
Energy Analysis: A very important site giving in-depth analysis of Zero-Point Energy theory, capture and use
General Interest: A site giving up to date information on interesting systems.
Bookshop: A site which provides important books on free-energy research An international free-energy forum with many links
Home Power: An excellent site with practical information on cutting home running costs
Technical Interests Site: A site which has a range of interesting things
Water atom vibrations: Details of how water atoms absorb energy and vibrate
Big Bang?: Is the universe electric?
Browse Patents: An interesting site for browsing through interesting patents
Free Patents On-Line: A very useful site for accessing patent information
Fresh Patents On-Line: Site for newly lodged patents
Motor Patents On-Line: Site for Motor patents
Tesla Page: Information on Nikola Tesla
Tesla Page: Further information on Nikola Tesla
Tesla Site: Tesla Coils, plans, Parts and Kits
Tesla Site: Articles on Tesla
Scott McKie: Article on Scott McKie
Free-Energy News: Current Free-Energy News page
Longitudinal Waves: Longitidunal and Transverse Wave motion
Free Energy: Free Energy Research archive
Free Energy Books: Free Energy book supplier
Free Energy: Free Energy web site
Zero-Point Energy: Dr. Harold Aspden’s web site
Magnetic Amplifiers: An explanation of magnetic amplifiers
Healing Devices: Rejuvenators designed and built by Dave Lawton
Water-level Kit: Water-level control kit, suitable for electrolysers.
Heating and Cooling: Video presentation on low power heating and cooling systems.
Free-Energy Information The Panacea compilation of Free-Energy information.
How gravity works A great presentation explaining how atom spin and gravity work.
Solar Power for Homes – DIY Solar Power and Emergency Solar Powered Generators.

This is a collection of relevant patents, most of which have had the wording simplified and the illustrations upgraded with the intention of making them easier to understand. There are also some relevant scientific papers which explain important discoveries. These documents provide a large amount of exciting information, usually in great detail, and much of which is not contained elsewhere on this or other web sites. These patents are included in the complete book download mentioned earlier.

Patent 1: Howard Johnson’s magnet motor patent 4,151,431. This patent describes a powerful motor which it claims can power an electrical generator.

Patent 2: Edwin Gray’s electric motor patent 3,890,548. This 80 horsepower motor not only powers a vehicle but recharges a spare battery, making the vehicle effectively fuel-less in operation. Each of the three power tubes used with this engine can power lighting and heating instead of a motor if that is required.

Patent 3: Edwin Gray’s electronic circuit patent 4,595,975. This patent shows the circuit which Edwin used to drive his 80 horsepower motor.

Patent 4: Teruo Kawai’s Electric Motor patent 5,436,518. This patent claims that this motor outputs three times more power than is required to operate it.

Patent 5:Stan Meyer’s water-splitter patent 4,936,961. This patent provides the details of how Stan was able to break water into hydrogen and oxygen gasses while using very little electrical power in a resonant circuit.

Patent 6: Stan Meyer’s water-splitter patent application WO 92/07861. This shows the circuitry used by Stan to hold his water-splitter cell automatically on it’s resonant point at all times.

Patent 7: Christopher Eccles’ water-splitter patent 2,324,307. This details a cell which works on electrical pulses like Stan Meyer’s but which has the electrodes outside the electrolysis cell.

Patent 8: Stan Meyer’s car-conversion patent 4,389,981. This shows a method of using hydrogen/oxygen gas mix injected into a vehicle engine as fuel to replace fossil fuels.

Patent 9: Stan Meyer’s water-injector spark-plug 1991 patent application 2,067,735. This shows a method of using water injected into a vehicle engine as fuel to replace fossil fuels.

Patent 10: Stan Meyer’s gas-burner patent 4,421,474. This shows how Stan used hydrogen/oxygen gas mix in burners to provide heating.

Patent 11: Puharich’s water-splitter patent 4,394,230. This shows how he splits water into hydrogen and oxtgen gasses using less power than is obtained by burning the gasses afterwards. It also covers his theories on how water can be split in an article written by him.

Patent 12: Shigeta Hasebe’s high-efficiency electrolyser patent 4,105,528. This shows how to undertake electrolysis of water with at least 10 times the gas output of Farady’s perceived maximum output. This simple cell should be able to double the actual measured outputs of the cell used to obtain the patent.

Patent 13: Charles Garrett’s hydrogen-carburettor patent 2,006,676. Charles claimed that he could run a car directly on water alone using this method where the air is drawn up through the electrolyte in his cell.

Patent 14: Archie Blue’s electrolysis bubbler patent 4,124,463. Archie’s cell operates very much like that of Charles Garrett, where air is drawn up through the electrolyte to dislodge the gas bubbles which have been formed by the electrolysis process.

Patent 15: Stanley Meyer’s patent application for methods of converting HHO gas into a fuel which can be used directly with unmodified car engines or burnt safely in furnaces.

Patent 16: Dan Davidson’s Acoustic-Magnetic Power Generator patent 5,568,005. This device has no moving parts, and provides power to run other devices.

Patent 17: John Bedini’s Motor/Generator patent 6,545,444. This device is not really a motor although it does have a rotating shaft. Its purpose is to capture excess energy which is used to charge additional batteries.

Patent 18: John Bedini’s Permanent Magnet Motor/Generator patent 6,392,370. This device runs at very high efficiency and can power other pieces of equipment.

Patent 19: Ruggero Santilli’s Underwater Arc Gas Generator patent 6,183,604. This patent shows a method of continuous hydrogen production through the use of a long-life electrode underwater arc system.

Patent 20: Stanley Meyer’s patent on his water-splitting spark-plug device 5,149,407. This patent shows how Stan was able to run an engine through water injection directly into the engine cylinders and how the water was charged before injection.

Patent 21: Xogen’s Water-Splitting Patent 6,126,794. This shows another version of Stan Meyers water-splitting cell, produced by his brother in law Stephen Chambers.

Patent 22: Juan Aguero’s Hydrogen/Steam Patent Application EP0,405,919. This patent application describes a high efficiency method of converting water into hydrogen and oxygen gasses to be used a fuel for an engine.

Patent 23: Stephen Horvath’s Hydrogen Car Patent 3,980,053. This patent shows a method for water electrolysis which it is claimed is able to power an engine. It shows the construction parts for adapting an existing car.

Patent 24: Charles Pogue’s first high mpg carburettor patent 1,938,497. This is the first of three patents from Charles, each of which describes a high-efficiency carburettor and explains how it operates.

Patent 25: Charles Pogue’s second high mpg carburettor patent 1,997,497. This is the second patent from Charles, showing how his previous design can be improved.

Patent 26: Charles Pogue’s third high mpg carburettor patent 2,026,798. This is the third patent from Charles, showing further improvements to his design. This carburettor has been tested and the tests results claim a performance under normal driving conditions resulting in more than 200 miles per US gallon.

Patent 27: Ivor Newberry’s high mpg carburettor/exhaust system patent 2,218,922. This is another design of carburettor which produces very high mileage results. There are more than 240 similar carburettor designs from different people, all claiming mpg figures in excess of 100 miles per gallon.

Patent 28: Robert Shelton’s high mpg carburettor patent 2,982,528. This is another carburettor design from the 240 claiming 100+ mpg figures.

Patent 29: Harold Schwartz’s high mpg carburettor patent 3,294,381. This is another carburettor design from the 240 claiming 100+ mpg figures.

Patent 30: Oliver Tucker’s high mpg carburettor patent 3,653,643. This is another carburettor design from the 240 claiming 100+ mpg figures.

Patent 31: Thomas Ogle’s high mpg carburettor patent 4,177,779. This is another carburettor design from the 240 claiming 100+ mpg figures.

Patent 32: Hermann Plauson’s atmospheric electricity patent 1,540,998. This shows how serious amounts of power can be taken from an aerial. This very long patent reads more like an instruction manual rather than a patent. Hermann describes a 100 kilowatt system as «small»!

Patent 33: Pavel Imris’s patent 3,781,601 for his Optical Electrostatic Generator which has an output more than nine times the input power and has no moving parts.

Patent 34: Jong-Sok An’s US patent 6,208,061 for a simple ‘no-load’ electrical generator which, unlike convential generators, has reduced input power requirements for increased generated current draw.

Patent 35: Roy Meyers’ GB patent 1913,01098 for device which achieves free electricity collection.

Patent 36:The Colman / Seddon-Gillespie GB patent 763,062 for a 1 KW power, 70-year life, lightweight battery replacement.

Patent 37:The Alberto Molina-Martinez US patent application 20020125774 for a self-powered Continuous Electricity Generator.

Patent 38: The Spiro Spiros patent WO 9528510 for an electrolyser which operates in over-unity mode. It also has the possibility of operating an internal combustion engine without needing any electrics at all. It is interesting to note that the Patent Office has granted Spiro a patent which clearly states, measures and documents over-unity operation.

Patent 39: The Michael Ognyanov patent application US 3,766,094 for a simple self-powered device which can drive an external load.

Patent 40: The Correa patent application for devices which can convert Tesla longitudinal waves into ordinary electricity.

Patent 41: The Correa patent for a device which produces greater electrical output than its own electrical input.

Patent 42: US patent 4,041,465 for a very high voltage solar cell / solid-state memory, etc. from Philip Brody.

Patent 43: The Aspden/Adams Motor-Generator patent for a device which has a power output greater than it’s own power input.

Patent 44: The Joseph Newman patent for a device which has a power output greater than it’s own power input.

Patent 45: The very large US patent 6,246,561 from Charles Flynn, demonstrating the doubling of magnetic flux in transformers, rotary drives, reciprocating and linear drives, plus two of his other patents.

Patent 46: The November 2005 US Patent Application 2005/0246059 A1 from Stephen Meyer, providing important information on the process of water-splitting.

Patent 47: A patent from Shigeaki Hayasaka showing an electrical generator which needs less than 20% of the input power of a standard generator.

Patent 48: A patent application from Larry Jamison showing a self-powered electrical generator which produces a substantial amount of excess electrical power.

Patent 49: A patent from Frank Fecera showing sixteen variations on his permanent magnet motor.

Patent 50: The Mead/Nachamkin patent for a device for converting Zero-Point Energy to electrical energy.

Patent 51: William Barbat’s patent application for a self-powered electrical generator.

Patent 52: Tom Bearden’s Motionless Electromagnetic Generator patent 6,362,718. This device has no moving parts, powers itself and provides power to run other devices.

Patent 53: The Carousel self-powered permanent magnet electrical generator.

Patent 54: The Reardon high-efficiency Lenz-less AC electrical generator.

Patent 55: The Spence self-powered, high-output electrical generator.

Patent 56: John Bedini’s Patent Application for a battery pulse-charger which can also drive electric motors or power a heater.

Patent 57: Robert Alexander’s Patent for a COP = 3 electric motor-generator.

Patent 58: An unusual patent application for a simple system which can sterilise food, purify water and decontaminate pollutants as well as produce hydrogen and oxygen separately.

Patent 59: A battery replacement which can power an electric car for hundreds of miles after a charging time of just minutes.

Patent 60: A simple permanent magnet motor design patent from Stephen Kundel.

Patent 61: An easy-build, very powerful permanent magnet motor design patent from Charles Flynn.

Patent 62: The Richard Willis 2009 patent application for a COP>>1 electrical generator with no moving parts.

Patent 63: The Henry Paine patent for converting HHO gas to an easily-used gas.

Patent 64: The PlasmaERG patent for a more advanced version of Josef Papp’s inert gas motor.

Patent 65: A high-efficiency wind-powered (or water-powered) electrical power generator from William McDavid junior.

Tesla’s Patents: All of the published patents of Nikola Tesla.

  Scientific Papers

Paper 1: Hydrogen Production from Water, using Pulsed DC size 4 Mb. 

Paper 2: George Hathaway and Peter Graneau’s paper on Water Arc Explosions size 360 Kb. 

Paper 3: Hydrogen Production via Plasma Electrolysis size 388 Kb. 

Paper 4: Peter Graneau’s paper on Over-unity Power from Arcs in Fog size 321 Kb. 

Paper 5: Evaluation of Engines with Plasma Booster Reformer size 151 Kb. 

Paper 6: T.V. Prevenslik’s paper on the Electrical Properties of Steam size 63 Kb. 

Paper 7: Reproduction of a newspaper article on Stan Meyer and his work size 600 Kb. 

Paper 8: Paper on The Water Fuel Cell System by Stanley Meyer size 3.5 Mb. 

Paper 9: Admiral Griffin’s lecture on Stan Meyer’s marine propulsion systems size 303 Kb. 

Paper 10: Powering your home using solar-generated hydrogen size 68 Kb. 

Paper 11: Cooling using solar power size 328 Kb. 

Paper 12: Making ice using solar power size 347 Kb. 

Paper 13: Using hydrogen to cook size 54 Kb. 

Paper 14: Using hydrogen to power a barbecue size 91 Kb. 

Paper 15: The Goksel / Rechenberg paper on ElectroHydroMagnetic propulsion size 711 Kb. 

Paper 16: A range of formula which may be useful size 215 Kb. 

Paper 17: A paper on Fuel Cells size 2.5 Mb. 

Paper 18: Low-current Electrolysis of Water by Prof. M. Kanarev size 62 Kb. 

Paper 19: Permanent Magnet Motor/Generator Design by Aleksandr Nagomy PhD size 1.4 Mb. 

Paper 20: The Theory of Antigravity by Dr. Harold Aspden size 754 Kb. 

Paper 21: Scientific Reports by Dr. Harold Aspden size 2.5 Mb. 

Paper 22: Lecture by Nikola Tesla to the Institute of Electrical Engineers in London – very detailed size 605 Kb. 

Paper 23: A good deal of biographical information on the genius Tesla size 632 Kb. 

Paper 24: Tesla’s energy collection and conversion method size 488 Kb. 

Paper 25: Electrogravitics Propulsion Systems by Tom Valone size 3 Mb. 

Paper 26: Extracting Useful Work from ZPE by Tom Valone size 2.5 Mb.

Paper 27: «A Dynamical Theory of the Electromagnetic Field» 1864 Lecture by Prof. James Maxwell size 1.5 Mb. 

600-page book: Maxwell’s book, Volume 1 download. size 8 Mb. 

Paper 28: Zero-Point Energy tapping via the Rodin Torus Coil from   size 3 Mb. 

Paper 29: Dan Combine’s Analysis of Radiant Energy collection (being revised at this time) size 2 Mb. 

Paper 30: A detailed examination of the physical properties of the Zero-Point Energy field size 592 Kb. 

Paper 31: Techniques for extracting energy from the Zero-Point Energy Field size 450 Kb. 

Paper 32: The Thomson/Bourassa paper on the Physics of the Aether (mainly for mathematicians). size 599 Kb. 

Paper 33: Stanley Meyer’s «Water Fuel Cell Technical Brief» size 4 Mb. 

Paper 34: An examination of Edwin Gray’s free-energy system by Mark McKay – Part 1 size 1.5 Mb. 

Paper 35: An examination of Edwin Gray’s free-energy system by Mark McKay – Part 2 size 510 Kb. 

Paper 36: An examination of Edwin Gray’s free-energy system by Mark McKay – Part 3 size 277 Kb. 

Paper 37: An examination of Edwin Gray’s free-energy system by Mark McKay – Part 4 size 1 Mb. 

Paper 38: An examination of Edwin Gray’s free-energy system by Mark McKay – Part 5 size 969 Kb. 

Paper 39: An examination of Edwin Gray’s free-energy system by Mark McKay – Part 6 size 637 Kb. 

Paper 40: An examination of Edwin Gray’s free-energy system by Mark McKay – Part 7 size 28 Kb. 

Paper 41: An examination of Edwin Gray’s free-energy system by Mark McKay – Part 8 size 28 Kb. 

Paper 42: Successful Russian replication of Searle’s self-powered anti-gravity device. size 607 Kb. 

Paper 43: Dave Lawton’s gravity-wave detector size 62 Kb. 

Paper 44: Russell’s Genero-Radiative Concept. This is a gravity-related paper, website link.

Paper 45: Torsion Field Effect paper from Wen, Jiang and Han of Beijing size 247 Kb. 

Paper 46: Free-Energy devices and background theory from Mr Tseung of China and Mr Shenhe Wang’s self-powered 5 kW generator. size 3 Mb.

Paper 47: An extension of Mr Tseung’s energy lead-out theory. 541 Kb.

Paper 48: A US Ministry Of Transport report on using hydrogen and hydroxy boosters with diesel engines. 1.4 Mb.

Paper 49: A highly technical and highly mathematical paper by D. H. Baziev on the speed of light. 607 Kb.

Interesting Web Sites: 
(Please note that while all of these sites were working recently, any of them may be taken out of service at any time. Also, many web hosts impose an arbitrary limit on the amount of traffic to any particular site and if that hourly limit is exceeded, then the hosting service shuts the site down for the next hour or so. If a site does not load, it is worth trying to access it again. If it still fails to load, try again later).

Electronics Sites:

Maplin Electronics: Useful catalogue, components, test gear, kits and consumer goods
All Datasheet: Semiconductor data sheets in downloadable ‘Acrobat’ format (ignore and odd characters and use the top left hand entry box for the component for which you need information)
Cricklewood Electronics: Supplier of semiconductors
Greenweld: Surplus components, test gear, magnets, etc.
Bull Electrical: Surplus electrical and electronic components, motors, etc.
ESR Electronic Components: Semiconductors, switches, wire, etc.
How to Wind Inductors: Easy-to-understand practical data on coil winding
Magnetic Properties: Magnetic properties of materials
How to Make Electric Motors: Easy-to-understand data on making electric motors
USA Based Components: Electronic components available for high-voltage devices
Electronics Calculators: On-screen calculators for component values
Electric Circuits: Lessons in electric circuits
Alternating Current: An In-depth tutorial on AC circuitry
Calculators: Calculator facilities for various coils and capacitors.
Components: Supplier of electron tubes etc.
Flyback Driver: Flyback driver site
Circuit Simulation: Electronic circuit simulation site
Electronics Training: Electronics training site
Wimshurst Generators: Wimshurst Generator supplier
Electronic Components: Jaycar Electronics: supplier of electronic components
Spark-gap Experiments: Spark-gap experiments site
High-voltage Experiments: High-voltage experimenter’s handbook
Electronics Training: All About Circuits: electronics training site
Capacitance: Information on capacitance
Zinc Oscillator: Zinc ‘negative resistance’ oscillator
UK Magnet Supplier: A really excellent source for all kinds of magnets at competitive prices.
Test Instruments: A supplier of test and measurement equipment in South Africa.
Teaching Website: A site which teaches electronics theory from square one.
Electronic instruments: a site supplying specialist tools.
Tesla Coil Tuner: Terry Fritz’s simple design.

Motors and Generators:

Compressed air: An important and very detailed web site on free-energy from compressed air
Moller Generator: JL Naudin’s research on Moller’s Atomic Hydrogen system
Motionless Magnetic Generator: JL Naudin’s research into Bearden’s MEG device
Free Electron Pump: JL Naudin’s experiments showing free-energy pick-up
One-battery Test: JL Naudin’s test which ran a motor from a fully discharged battery
Magnet Motor Tests: Howard Johnson’s magnet motor principle verified by JL Naudin
Mini Romag: JL Naudin’s details on the ‘Mini Romag’ magnet generator
Camus Magnet Motor: JL Naudin’s details on this motor design
Solid State PSU: Very efficient flourescent tube driver (possibly over-unity)
Floyd Sweet’s VTA: JL Naudin’s details on the ‘Vacuum Triode Amplifier’
Muller Motor: Muller’s own motor site: input 38 amps output 400 amps
John Bedini Pictures: Some of John’s motor/generator pictures and diagrams
John Bedini’s SG Motor: Step-by-step constructional instructions
Edwin Gray’s Motor: Pictures and information on the original motors
Ed Gray’s motor: Background information and photographs of the engine and inventor
Over-Unity Site: Presentations on many interesting devices
Simple Electric Motors: Very simple instructions on building easy-to-make small motors
The RotoVerter: A high-power ‘Over-Unity’ generator system
Energy Capture: Energy capture via an aerial
Speed Control: Electric motor controllers
Motor Control: DC motor speed controller
Generator: The induction generator
Magnetic Bearings: Information on magnetic bearings
Flynn Device: The Flynn parallel-path magnetic device
The Transverter: A Transverter replication
Compressed air Engine: An interesting heat pump style engine design
Special Steam Engine: Low-cost, simple, new engine design
Self-powered water pump generator: Video of a water pump driven electrical generator which is fuel-less.
Self-powered wheel: Low-cost, simple, magnetic demonstration rotor
More details: Further constructional details on the wheel wiring.
Perendev Motor: High-output permanent magnet motor design
Prof Vasiliy Shkondin: Commercially available very high-efficiency electrical motor
Rotary Attraction Motor: Peter Lindemann’s motor design with John Bedini’s Drive and Recovery circuit.
Bedini Circuits A site with in-depth details of John Bedini’s various circuits.

Vehicle related:

Fuel consumption improver: Add-on wing spoiler for a vehicle which can triple mpg
Water-car Forum: An active group for sharing information on powering cars from water
Bookshop: A site which provides instructions on improving mileage in cars
Four-Stroke Ignition: An excellent description of ignition, with great photographs
Bookshop plus: DIY information on converting your car to natural / other gas, etc.
Hydrogen Powered Lawnmower: A site with instruction on converting small engines
Vehicle Sensors: Adjustments to the fuel-monitoring computer in your vehicle
Mileage Improvements: Better mileage for the home mechanic
Electrolyte Supplier: A US supplier of Potassium Hydroxide in reasonable quantities
Water Fuel: Dave Lawton’s web site giving information on water as a fuel
Water Powered Cars: A site giving information on water powered vehicles
Spark Plugs: A site giving information on high-tech spark plugs
Improving mpg: Fuel vapouriser systems
Hydrogen Fuel: Running vehicles on hydrogen
Electric Car: Converting a car to run on electric power
Fuel Conversions: Propane and natural gas conversions for vehicles
Fuel Conversions: Hydrogen produced from aluminium for use in vehicle engines
Improving mpg: Better mileage for the home mechanic
Engine running on hydroxy: Demonstration at 12 lpm.
Components: UK supplier of parts for Boyce and Lawton electrolysers, battery desulphators, etc.
Electric Car: Website showing how to convert a car to electric power.
Electric Car: School project solar-powered electric car built from scratch.

General interest:

Kapanadze replications. J L Naudin’s collection of the successes of various replicators – definitely worth a visit.
Star-drive Generator: Details of unlimited free-energy on tap for ever – most impressive.
RexResearch: The leading Free-Energy research site – definitely a ‘must-visit’ site.
Prof. Evert: A most important web site from one of the top zero-point energy researchers.
John Bedini: A presentation of John’s Zero-Point Energy system – highly recommended.
Alexander Frolov: Important experimental data and theory on accessing free-energy.
Energy Analysis: A very important site giving in-depth analysis of Zero-Point Energy theory, capture and use
General Interest: A site giving up to date information on interesting systems.
Bookshop: A site which provides important books on free-energy research An international free-energy forum with many links
Home Power: An excellent site with practical information on cutting home running costs
Technical Interests Site: A site which has a range of interesting things
Water atom vibrations: Details of how water atoms absorb energy and vibrate
Big Bang?: Is the universe electric?
Browse Patents: An interesting site for browsing through interesting patents
Free Patents On-Line: A very useful site for accessing patent information
Fresh Patents On-Line: Site for newly lodged patents
Motor Patents On-Line: Site for Motor patents
Tesla Page: Information on Nikola Tesla
Tesla Page: Further information on Nikola Tesla
Tesla Site: Tesla Coils, plans, Parts and Kits
Tesla Site: Articles on Tesla
Scott McKie: Article on Scott McKie
Free-Energy News: Current Free-Energy News page
Longitudinal Waves: Longitidunal and Transverse Wave motion
Free Energy: Free Energy Research archive
Free Energy Books: Free Energy book supplier
Free Energy: Free Energy web site
Zero-Point Energy: Dr. Harold Aspden’s web site
Magnetic Amplifiers: An explanation of magnetic amplifiers
Healing Devices: Rejuvenators designed and built by Dave Lawton
Water-level Kit: Water-level control kit, suitable for electrolysers.
Heating and Cooling: Video presentation on low power heating and cooling systems.
Free-Energy Information The Panacea compilation of Free-Energy information.
How gravity works A great presentation explaining how atom spin and gravity work.
Solar Power for Homes – DIY Solar Power and Emergency Solar Powered Generators.

Good luck with your research.
P. J. Kelly

If you wish to promote this information, why not mention the address of this website in your own blog or StumbleUpon entry?




ENERGÍA LIBRE; Carrera hacia el Punto Cero

A lo largo de este documental se hace un recorrido desde los orígenes hasta el día de hoy en lo relativo a la energía libre y las diferentes tecnologías para captar esta energía. Se inicia con la época de Nikola Tesla y se presentan varios investigadores, ingenieros e inventores que a lo largo del siglo XX han trabajando y conseguido captar esta energía del campo de punto cero. Se muestran diferentes tipos de motores electromagnéticos que funcionan exclusivamente de la energía captada del vacío cuántico. También se habla de antigravedad, como el efecto Hutchison, descubierto por John Hutchison. Recomiendo muy mucho dedicar el tiempo a ver este documental, no sólo una vez sino varias, ya que es una fuente de información y también de educación.

Energía libre; Carrera hacia el Punto Cero

Descarga directa

(unir las 4 partes con FileSplitter and Joiner)


ENERGÍAS LIBRES, RKB radio ” Tiempo para la Verdad “



Energía obtenida a través de fenómenos físicos que no requieren ningún tipo de combustible, es decir, de generadores que suministran energía sin necesidad de ser alimentados. Aunque esta definición interfiere totalmente con la física actual, los estudios, experimentación y desarrollo de un gran número de motores muestran que es una realidad y que por tanto la física actual debe ser revisada.

Dos de nuestros queridos colaboradores de DESPERTARES se desplazaron a Barcelona reciéntemente a hablar sobre la ENERGÍA LIBRE en el programa de radio RKB presentado por Miguel Celades, recomendamos no perderse toda la charla ya que no tiene desperdicio. Ha llegado la hora de destapar la energía que se nos lleva ocultando tanto tiempo, ha llegado el fin del reinado del petróleo.


También en youtube

En este programa se habla de las Energías libres de la mano de especialistas y estudiosos. Además de hablar de los diferentes tipos de Energía Libre también se hizo un repaso histórico de los inventores y pioneros de dichas energías, analizando sus vidas y en muchos casos sus enigmáticas y trágicas muertes.

” La mayor parte de la comunidad científica desecha la idea de máquinas de “energía libre” o “sobreunitarias” debido a que dicen que el comportamiento de tales máquinas viola la “Segunda Ley de la Termodinámica”. El propósito de este artículo es encarar de frente este asunto desde un punto de vista científico alternativo. Muchos ingenieros e inventores, trabajando en el campo de la energía alternativa, todavía erróneamente creen que las “Leyes de la Termodinámica” son universalmente ciertas.
Para ellos, una máquina de “energía libre” puede solo ser un astuto desliz científico en el que la máquina se convierte en “forajida”,rompiendo algunas de las leyes fundamentales del universo. Para que haya progreso en este campo, las limitaciones y errores inherentes a las “Leyes de  la Termodinámica” deben ser expuestas.
RKB Barcelona Energias Libres

Únicamente entonces la gente se dará cuenta que la experimentación científica es la única herramienta confiable para revelar el comportamiento de la realidad física. “
Dr. Peter A. Lindemann


Inventor Andrea Rossi

Andrea Rossi

Andrea Rossi, the ECAT developer, is an Italian inventor who has a Doctor’s Degree in Philosophy from Milan University 1975 (Dottore Magistrale in Filosofia) Università degli studi di Milano 1975) where he conducted his thesis on relativity.

See the full PDF here

During his twenties, he already started to produce plants to recover energy from waste heat from organic waste and similar sources. At the age of 22, he started his own company in the field of energy. He has always been interested in the production of energy and in the last forty years, he has worked in this field.

But it wasn’t until in 1988 when Fleischmann of the University of Southampton and Pons of the University of Utah, applied to the United States Department of Energy for funding towards a larger series of experiments on what was popularly called cold fusion, that Andrea Rossi became seriously interested in the field. Up to this point Fleischmann & Pons had been funding their experiments using a small device built with $100,000 out-of-pocket money.

Press conference 1989 with Martin Fleischmann

The grant proposal was turned over for peer review, and one of the reviewers was Steven E. Jones of Brigham Young University. Jones had worked for some time on muon-catalyzed fusion, a known method of inducing nuclear fusion without high temperatures, and had written an article on the topic entitled Cold nuclear fusion. Fleischmann and Pons and co-workers met with Jones and co-workers on occasion in Utah to share research and techniques. During this time, Fleischmann and Pons described their experiments as generating considerable excess energy, because it could not be explained by chemical reactions alone.

They felt that such a discovery could bear significant commercial value and would be entitled to patent protection. Jones, however, was measuring neutron flux, which was not of commercial interest. This findings will have a great influence on the young Andrea Rossi.

In mid-March of 1989,  the Pons and Fleischmann paper was published  by the Journal of Electroanalytical Chemistry. Their  announcement drew wide media attention. The 1986 discovery of high-temperature superconductivity had caused the scientific community to be more open to revelations of unexpected scientific results that could have huge economic repercussions and that could be replicated reliably even if they had not been predicted by current theory. Cold fusion was then proposing the counterintuitive idea that a nuclear reaction could be caused to occur inside a chemically bound crystal structure.

However,  the US Department of Energy (DOE) formed a panel to investigate cold fusion, which is also called low energy nuclear reactor. They subsequently issued a report in November 1989 that concluded that the results did not present convincing evidence that useful sources of energy would result from the phenomena attributed to cold fusion.This put an end to Pon’s and Fleischmann’s application for DOE funding.

Mr. Rossi was already working in the energy field at that time. He was fascinated with the Pons and Fleischmann discovery and tried to replicate their effect with electrolysis too. Although he did not succeed at that time, the seed  in the development of the energy catalyzer fusor, i.e. ECAT, had been planted. He continued working on the ECAT in between his other contracts in power plant production. In 2007, Andrea Rossi arrived at the very critical point in his research and concentrated his time on his invention.

This was not only by chance or sheer luck, but rather a direct result of a long trial and error process where a vast amount of different configurations of the ECAT had been tried. And finally, a stable, reproducible configuration was discovered. Back then, in 2007, Andrea Rossi knew there was no turning back. He instantly realized the need of a 3rd party expert verification. Mainly because of caution since at these energy levels, both gamma radiation and neutron radiation could be lethal. He needed external verification and assurance that the amount of radiation was low enough to be non-hazardous.

Rossi knew he was on to something big, something so powerful it could change the world forever. There was no room for mistakes here. In July 2007 Rossi therefore contacted one of the most respected physics scientists in the Nickel-Hydrogen field, Professor Emeritus Sergio Focardi of the Bologna University. Professor Focardi, who had been researching Nickel-hydrogen phenomenon since early 90’s was intrigued.

Another reason Rossi decided to contact Prof. Focardi was that he felt that he was at a point where all other projects had to be dropped in favor for the ECAT. An invention of this magnitude would require all his focus. For Rossi it was all or nothing. Before putting all eggs in the same basket, he needed to be absolutely 100% percent sure of its capabilities. So Rossi arranged a challenge for Prof. Focardi, telling him “I will give you a prize (size non-disclosed) if you can show me that what I have done is wrong and does not work”. Professor Focardi accepted the challenge immediately and examined the ECAT under great scrutiny for several days in a controlled environment. A few days later he came back disappointed but with a smiling grin on his face telling Rossi that he was sorry (for not winning the prize) and that he believed that the Energy Catalyzer truly worked as stated.

Andrea Rossi with Sergio Focardi Photo:Frederico Borella

Andrea Rossi then hired Sergio Focardi as a consultant and his work on nickel hydrogen reactions prior with physicist Piantelli proved to be invaluable. Together they looked into the aspect of protecting the environment from the radiations, and to thermalize the radiations to in order to produce heat.

An application in 2008 to patent the device internationally had received an unfavorable preliminary report from the World Intellectual Property Organization at the European Patent Office. It was noted that the description of the device was based on general statements and speculations. EPO also cited numerous deficiencies in both the description and in the evidence provided to support its feasibility. They also found incompatibilities with current scientific theories.

Andrea Rossi’s patent approved by the Italian Office for Patents and Trademarks

In April of 2011, however,  an application was approved by the Italian Office for Patents and Trademarks. The agency issued a patent for the invention, valid only in Italy. The Energy Catalyzer’s International, European, and U.S. patent applications are still pending up to this time.

In 2009, Mr. Rossi introduced to the public a process and a device called the Energy Catalyzer. This is a revolutionary  process in energy production and is also called low energy nuclear reactions. It could be a breakthrough invention since it can solve some of the energy problems of our planet.

The method does not use or produce radioactive materials. It utilizes nickel and hydrogen. And  when the reactor is turned off, after twenty minutes, every kind of radiation is thermalized. What is left  are metals like nickel and some copper. The radiation that is produced here are contained inside the box of the reactor which is shielded by lead. These gamma ray radiations are in the range between 50 and 200 KEVS (kiloelectronvolts), which are very low energy radiations.  It also has a maximum life of twenty minutes, because they are completely thermalized, which also means that they are transformed into heat. The fact this reactor does not use radioactive materials and do not leave radioactive materials  makes it a safe nuclear reactor.

Before going public with his ECAT fusion invention, Andrea Rossi had also manufactured a boiler, using this method, that has heated his factory Ferrara, a small town in Northeast Italy. Since this boiler has heated the factory for about a year, they were able to make experiments in an actual working reactor. The reactor in Ferrara reactor is similar to the modern ECAT that they are making and has a module of about 20 kilowatts. It provides heat to an area that measures about 1000 square feet.

Ferrara is a very cold area in Italy where winter can  go on for the duration of  five months in a year. With temperatures ranging from 6 to 10 degree Celsius. The reactor was able to provide heat to the office and factory for over a year. This result encouraged Andrea Rossi to make the other modules that later would be tested by other scientists. They are now in the process of building a one megawatt plant.

The 2009 patent application applied for by Andrea Rossi  claims a method and apparatus for carrying out nickel and hydrogen exothermal reactions with production of copper.  Although the patent cites previous works on cold fusion, Rossi also asserted that it is not cold fusion, but rather LENR, Low-Energy Nuclear Reaction system.  Here, the hydrogen is heated at a given temperature with a simple resistor. When the ignition temperature is reached, the energy production process starts where the hydrogen atoms penetrate into the nickel and transform it into copper.

The test on the 14 Jan 2011 was decided upon already in October-November 2010 and was more or less enforced by Prof. Focardi. People from the University of Bologna that was there as outside, private observers and Focardi himself were very eager to make this test, in order to show the world the game changing developments that have been made in a field that, historically, has suffered such bad reputation in mainstream scientific community since Fleischmann–Pons cold fusion research in 1989 failed to deliver replication.

Andrea Rossi himself was very skeptical about such an early test, as he, as an inventor and entrepreneur was more eager to develop the end product than to step forward as a public figure in the scientific community. However, in the end he felt obliged to go along with the testing because the Bologna University has had prominent historic figures such as Nicolaus Copernicus working there and he was impressed that the University was prepared to champion this new technology. After all, University of Bologna is the oldest continually operating university in the world with roots from the 11th century.

One negative aspect of these early tests was that they required a lot of time, and deviated from Rossi’s original research plan and therefore slowed down the product development. Rossi has also been exposed to journalists in the past who are more interested in discrediting him and his research than to objectively explore this new groundbreaking technology.

Today, Andrea Rossi is so tired from all the journalistic inquiries that he has decided, from now on, to let the ECAT talk for itself. He stresses, though, that not all bad has come from these tests; through them he has gotten to know many interesting persons, which several has a Swedish connection. These persons have increased and influenced Andrea Rossi’s appreciation of Sweden tremendously, to some extent because of their scientific approach but also because Andrea Rossi find them to be genuinely warm hearted persons.

This ECAT invention also recieve some skepticism,  Discovery Channel analyst Benjamin Radford wrote, citing a column, that the method is fishy.  On the other hand, Levi, in an interview with Ny Teknik, stated that what has impressed him was that it produced 10 kW of measured energy output, and this output is completely repeatable. He alsdo urged an experiment with continuous operation for at least one or more days.

Another test that lasted for a period of 18 hours, was performed in Bologna, in February 2011, by Levi and Rossi, which was not open to the public. The process was ignited by 1,250 watts for five to ten minutes, and power was then reduced to 80 watts . Cooling was supplied by tap water and flow volume was monitored. As again reported by Ny Teknik,  at the start of the experiment, the temperature of the inflowing water was seven degrees Celsius. For a while the outlet temperature was 40 degrees Celsius.

It had a flow rate of about one liter per second, which equates to a peak power of 130 kilowatts. The power output was later stabilized at 15 to 20 kilowatts. In this experiment, Levi stated that all chemical sources are now excluded.

Another ECAT test was done In March 29, 2011 by two renowned Swedish physicists. They were Hanno Essén, an associate professor of theoretical physics and a lecturer at the Swedish Royal Institute of Technology and former chairman of the Swedish Skeptics Society and Sven Kullander, Professor Emeritus of High Energy Physics at Uppsala University. He is also chairman of the Royal Swedish Academy of Science’s Energy Committee.

Andrea Rossi with Sven Kullander and Hanno Essén

They participated as observers in a test of a smaller version of the Energy Catalyzer. This test ran for six hours with a power output estimated at 4.4 kW. Total energy produced was about 25 kWh. Essen and Kullander later reported that any chemical process should be ruled out for producing 25 kWh from whatever is in a 50 cubic centimeter container. The only alternative explanation they can give is that there is some kind of a nuclear process that gives rise to the measured energy production.

Two more ECAT demonstrations were held in July 2011. The first one was covered by the Italian 24-hour all-news State-owned television channel Rai News.  In this demonstration, an Ny Teknik author attended and tested for some previously noted possibilities of fraud. He calibrated the ammeter, measured the water flow by weighing and calibrated the temperature-sensor probe to confirm that all water is converted to steam. The result was a measurement that showed a net power of between 2.3 and 2.6 kilowatts. The input power was pegged at 300 watts.

By this time, Andrea Rossi’s ECAT invention has attracted a lot of attention. The Italian newspapers Il Sole 24 Ore, Il Tempo, La Stampa,  Il Fatto Quotidiano, Rinascita, Il Resto del Carlino and La Republica reported on Rossi’s Energy Catalyzer.  Many national Italian radio stations and news magazines , and a 25-minute television documentary on Rai News, have also reported on the Energy Catalyzer. It was also the topic of a series of articles in the Swedish Ny Teknik and an article in German Telepolis.

In Greece, the  coverage appeared in the daily financial newspaper Express and on the State-owned New Hellenic Television.  In the United States it was covered in EE Times, presented in the Fox News Channel, Discovery News, the Washington Times  and in the show Coast to Coast AM. Its coverage about was also aired by the Voice of Russia where Rossi’s involvement in the Petroldragon affair was also mentioned.

Rossi and Focardi’s invention recieved a setback when it was rejected by  a peer-reviewed scientific journal. Rossi self-published  it in his blog, Journal of Nuclear Physics.  Many physicists are skeptical of the method because fusion of nuclei requires very high temperatures according to current knowledge and because fusion should produce very high levels of gamma radiation.

Peter Ekström, a lecturer at the Department of Nuclear Physics at Lund University in Sweden, concluded that the whole story is one big scam,  which will be revealed in less than one year. Kjell Aleklett, a physics professor at Uppsala University in Sweden also voiced his skepticism, albet, in a more diplomatic way.

During 2011, the EV World published an audio interview with Dennis M. Bushnell, Chief Scientist at NASA Langley Research Center in Hampton, Virginia. Bushnell identified the LENR-field as the most interesting and promising field of energy production. Dr. Kim E. Yeong, a respected physicist from the Purdue University also presented a theoretical explanation on the method.

Rossi has co-founded the company Leonardo Technologies Inc. or LTI, which stocks he later sold. The company has done contracts for the US Department of Energy in the past.  At present, Andrea Rossi is back in  Miami, Florida presumably producing his Energy Catalyzers there for his company Leonardo Corporation.

In a more recent development, Andrea Rossi made a contract with AmpEnergo, a US company. The latter is to receive royalties on sales of licenses and products built on the Energy Catalyzer, i.e. ECAT, in the Americas.

Some content was originally published at 

ECAT.COM highly recommends that you watch this excellent documentary about the ECAT and Andrea Rossi.